产业新闻

您当前的位置:主页 > 产业新闻 >

Arnold Gruppe单晶铸件加工技能日趋完善

来源:http://www.yiyoumask.com 编辑:环亚娱乐ag88真人版 时间:2018/09/02

  Arnold Gruppe单晶铸件加工技能日趋完善

   Arnold Gruppe现已将多晶硅砖出产的成功机械理念运用到单晶硅砖出产中。2011年9月,Arnold Gruppe将在国际最有影响力的光伏太阳能展PVSEC上初次推出两款新式加工机械以扩展其供给规模。这两款新开发的全自动72/454切头中心和72/476切头锯出产精确度高,使Arnold Gruppe的单晶铸件加工和自动化技能愈加完善。

  The new cropping center, designed for ingot length up to 3,000 millimetres, has been designed for automated cutting of cones (top and tail pieces), test wafers as well as cutting to length of mono-crystalline ingots into defined segments between 250 and 1,000 millimetres. Optionally it is possible to crop either raw ingots (as grown) or already squared ingots, depending on the type of pre-process choosen by the manufacturer. The work flow of the machine is configured in a way that the operator will be able to load and unload the machine in a most flexible manner avoiding interruption of the production cycle. Thanks to continuous production in the sawing area

  the machine will achieve an excellent utilisation rate. Based on „Failure Mode and Effect Analysis (FMEA) the vertical construction principle of the machine bed and sawing unit have been developed. Hence optimal acces-sibility of all machine guidances, drives, electrical installations and cutting disc is guaranteed.

  Arnold, squaring saw, 72_476

  The new ingot squaring saw is characterized by its high production accu-racy, productivity, cost effectiveness as well as high life time. The vibration reducing stiff machine basis, consequent further development of thin plate sawing technology, easy handling and continuous process control are only a few features which excel this machine. The flexible clamping concept al-lows to either square an ingot as a whole (as grown) or cropped ingot seg-ments. The enormous loading capacity of 3,000 millimetres for either one complete ingot or up to five single - already cropped – segments from 180 to 1,000 millimetres is an enormous advantage as optimal machine load is always possible.

  Both novelties are equipped with the Arnold thin blade sawing technology. This leads to an enormous reduction in kerf loss due to sawing blade thick-ness of only 1.5 millimetres. Compared to commercially available blade thickness of up to 3.5 millimetres loss of silicon will be more than halved. Both machines incorporate the Arnold process analysis tool with an open interface to the higher-ranking MES (Manufacturing Executing System). Arpat, the Arnold Remote Production Analysis Tool, collects, analyses, re-cords and visualises the individual processes and parameters.

  Arnold, Cropping Center, 72_454

  The robust and low-maintenance machine design of both product novelties results in high machine availability and extremely low operating costs (TCO). The squaring saw is immediately available and will be realized including automation concepts on request. The cropping saw will be available by end of 2011. Further details, prices and delivery time are to be inquired from supplier.

  

   Arnold Gruppe单晶铸件技能光伏设备